Shutter Door Bottom Rail Roll Forming Machine manufacturer

Home > Product > Door and Window > Metal Shutter Door Roll Forming Machine > 0.7-1.2mm Galvanized Metal Steel Rolling Shutter Door Bottom Slat Shutter Door Bottom Rail Roll Forming Machine

0.7-1.2mm Galvanized Metal Steel Rolling Shutter Door Bottom Slat Shutter Door Bottom Rail Roll Forming Machine

Email: sales@suhangmachine.com

Tel: 8613606193016

Whatsapp: 8613606193016

description1

Zipper closure 1/4 zip athletic pullovers for men. Stretchy, lightweight, fast-drying fabric for superior performance. REGULAR FIT - US standard sizes. An athletic fit that sits close to the body for a wide range of motion, designed for optimal performance and all day comfort. FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them in place during workout

Specification

	Items	Specifications
Material of coil	Material Thickness	0.7-1.2mm galvanized steel
De-coiler	Weight	3 tons manual
Forming system	Rolling Speed	About 8-12 m/min
	Roller Stations	About 28 stations forming
	Roller Material	Cr40 Steel with quenching
	Shaft Material	45# Steel Diameter 60mm shaft
	Main Motor Power	2*5.5 kw
Cutting system	Cutting method	Saw cutting
	Tolerance	+-1.5mm
Electrical control system	Electric Source	380V, 50HZ,3 phase
	Control System	PLC Siemens
	Weight	About 8 tons
	Way Of Drive	single chain
	Size of machine	Length 11000mm* Width 800mm* Height 1200m
	Operation worker	2 workers

Machine component

1.This machine is made up of roll forming machine,manual decoiler,cutting machine,PLC control and out put table.

2.The machine is stable,no noise,no shake.

3.It drives by chain, total 28 rollers number to make best products.

4.The touch screen is hang over, it is not under the floor.

5.When you get the machine,it is no need to assemble and connect the complicate cable of the machine, you only need to connect one main cable, then the machine is working.

And the profile is as follows

Also we can customized as your requirements

Application

The final bottom section of the curtain and is often 'T' shaped or 'L' shaped to give additional rigidity, which commonly used in roller shutter doors and similar industrial door systems.

Typical Use

Roller shutter doors (most common)
Industrial doors and security shutters
Some fabrication or structural support applications

It acts as the bottom edge reinforcement of the shutter curtain, improving durability and operation.

0.7-1.2mm Galvanized Metal Steel Rolling Shutter Door Bottom Slat Shutter Door Bottom Rail Roll Forming Machine

Typical Use

CONTACT US