Warehouse shelf upright system roll forming machine is widely used to produce upright post, shelf panel, back panel/ board, box beam and step beam machine, beam welding machine.
The machine can do thickness is from 0.7-1.2mm with raw material Cold-rolled Steel, Galvanized Coil, Carbon steel.
Our produced profile meet ISO, CE, UL standards, and our machine is applied to Warehouse ,supermarket ,industry or home.
The shelf box machine is together with the top hat machine to make the shelf box for the supermarket shelf. Sussman Shelf box machine is included the de-coiler, the hydraulic punching device, the main roll forming machine, and the hydraulic cutting device. The shelf box machine can make width from 100-600mm, also can do 200-900mm. It is the good choice for the supermarket shelf business.
We have experience of exporting our pallet racking system roll forming machine to Mexico, Bangladesh, Costa Rica, Russia, Dominica, etc.
1. Materials to form: According to the customers’ requirement Used for 200mm-600mm (one-sided slide-able, adjustable by electric), thickness 0.6-1.0mm, length is variable from 0-10000mm
2. Forming steps: About 18 steps
3. Material of rollers:GCr15 steel, precision-machined, high frequency quenching HRC58-62, diameter of rollers: >¢150
4. Material of main shaft : 45# high quality steel (diameter>¢50)
5. Chains’ material: 45# steel, high frequency quenching, circular pitch: 38.1; number of teeth: 13
6. Cutting: Hydraulic cutting; quenching HRC58-62
7. Electronic control: PLC control
8. Dimension of machine: 12000mmX2000mmX900mm
10. Drive system: Chain drive, 7.5KW main motor power, working speed: 3-15m/min;
11. Welding structure: material of fixed beam and walking beam: hot-rolled steel, the base and rack are be gantry planer processing after welded, work platform is not allowed stress deformation; main machine table-board’s plainness <2mm/1000mm
12. Parts: Slide: imported from Japan; bearing: Zhonghang Brand of Harbin
13. Punching: Punching the holes at the press machine before forming the shapes
14. Bending: Bending after the hydraulic cutting
Working flow
De-coiler—→Level device —→ Hydraulic punching notch—→Main roll forming machine—→Hydraulic cutting—→Bending—→ Run out table
name |
quantity (set) |
De-coiler |
1set |
Punching |
1set |
Level device |
1set |
Hydraulic cutting and bending machine |
1set |
Main roll forming machine |
1set |
Run out table |
2 sets |
Control panel |
1set |
Our display screen is touch screen, not text touch screen.
Sussman roll forming system: We will make the hand wheels at the feeding device to adjust feeding width, and we also make the wheels with the numbers then you know how to adjust right and left sides, also we made the rulers on the bedding, you can adjust the profile height and width according to the rulers.
Screw with numbers is to adjust material thickness easily, also with protecting cap also add laminating film device and felt to make the board flatter and smoother without scratches.
The machine is equipped with a detection switch device, in case of emergency, emergency alarm, stop operation.